PFZ Enhanced Polyethylene Corrosion-Resistant Pump

1.Corrosion-resistant transfer: Resists strong acids, alkalis and salts for chemical waste and wastewater with solids.

2.Anti-clog operation:Large-channel impeller passes particles and fibers without blockage.

3.Stable performance:High efficiency, low consumption, supports continuous operation with low maintenance cost.

4.Flexible installation:Multiple mounting methods, compact structure, easy disassembly and assembly.

1.Medium Environment：Acid-alkali liquid, salt solution, chemical waste liquid, corrosive wastewater with fine particles/fibers.

2.Temperature Environment：Medium temperature -5℃~60℃; Ambient temperature -10℃~40℃.

3.Installation Environment：Indoor/outdoor (rain and sun protection required for outdoor), chemical workshops, electroplating factories, laboratories, sewage treatment stations.

4.Electrical Environment：3-phase/1-phase AC power supply, non-explosive places without strong electromagnetic interference or direct high-temperature heat source exposure.

1.Medium Environment：Acid-alkali liquid, salt solution, chemical waste liquid, corrosive wastewater with fine particles/fibers.

2.Temperature Environment：Medium temperature -5℃~60℃; Ambient temperature -10℃~40℃.

3.Installation Environment：Indoor/outdoor (rain and sun protection required for outdoor), chemical workshops, electroplating factories, laboratories, sewage treatment stations.

4.Electrical Environment：3-phase/1-phase AC power supply, non-explosive places without strong electromagnetic interference or direct high-temperature heat source exposure.

1. Chemical industry: Transportation of acid and alkali waste liquids, salt solutions, and chemical raw material washing water

2. Electroplating industry: Transfer of pickling and phosphating wastewater, electroplating rinsing water, and heavy metal waste liquid

3. Dyeing and printing industry: Dye wastewater, bleaching wastewater, and textile washing water discharge

4. Pharmaceutical industry: Laboratory acid and alkali solutions, pharmaceutical intermediate wastewater, and small-scale washing water transportation

5. Food processing: Treatment of pickling wastewater, acid and alkali cleaning water, and fruit juice processing waste liquid

6. Municipal Engineering: Small-scale sewage treatment plants, community sewage lifting systems, and acid/alkali wastewater pipe networks

7. Research institutions and universities:Laboratory corrosive liquids, media circulation in small experimental devices

1.Installation Check：Ensure firm installation, sealed pipes without leakage, and correct inlet/outlet valve status; avoid collision with sharp hard objects.

2.Pre-Start Preparation：Fill the pump chamber and exhaust air; check power supply and liquid level; ensure medium temperature is within the rated range (-5℃~60℃).

3.Start & Operation：Jog the motor to confirm rotation direction; start with no load, then open the outlet valve slowly; monitor pressure and current, avoid dry running.

4.Shutdown Operation：Close the outlet valve first, then cut off the power; keep the pump chamber full of liquid for short-term shutdown; drain the medium and rinse with clean water for long-term shutdown.

5.Special Notes：Prohibit conveying high-temperature and strong oxidizing media; check the seal regularly, and prevent polyethylene parts from contacting organic solvents.